Roofing
Roofing Pricing
Straight answers about what a new roof costs — the ranges, the variables that move the price, and how to tell real value from a cheap bid. Every home is different, so your exact number comes from a free, no-pressure inspection, but this page will help you budget with confidence. Call us anytime at (781) 293-1417.
What You're Paying For
The DelPrete Roofing System
When we quote a roof, we’re not just pricing shingles — we’re pricing a complete, engineered roofing system built to survive New England winters. That system is where the long-term value (and much of the cost) lives.
Our primary product: architectural asphalt shingles.
The large majority of the roofs we install are architectural (dimensional) asphalt shingles. As an Owens Corning Platinum Preferred Contractor — the top tier, held by roughly the top 1% of contractors nationwide — we primarily install Owens Corning TruDefinition® Duration® shingles as part of a complete Total Protection Roofing System®. We also install CertainTeed Landmark® shingles.
For homeowners who want the look of cedar or slate without the upkeep, we install F-Wave synthetic shingles. For low-slope and flat areas — porches, additions, garages — we install EPDM rubber roofing.
A complete system — not just shingles:
- Full tear-off of the old roof down to the deck (we never install over existing shingles)
- Inspection and replacement of any rotted or damaged decking
- Ice & water shield in the valleys, eaves, and other vulnerable areas
- Synthetic underlayment across the entire roof
- Proper intake and exhaust ventilation
- New flashing, drip edge, and ridge cap
- Manufacturer-backed and written workmanship warranties
Cost Drivers
What Raises the Price
Roof Size
More roof area — measured in “squares,” where 1 square = 100 sq. ft. — means more material and more labor.
Roof Complexity
Valleys, dormers, hips, chimneys, and skylights all add labor and detailed flashing work.
Flat Roofs
Per the Massachusetts building code, asphalt shingles cannot be installed on roof slopes less than 2:12. Below a 2:12 pitch, a low-slope roofing system must be used — such as EPDM rubber — which runs over 3× the cost of asphalt roofing shingles.
Low-Slope Roofs
Roof sections with a pitch between 2:12 and 4:12 are classified as low-slope roofs. While asphalt shingles are permitted on these roofs, they require enhanced waterproofing measures — full/double ice & water shield coverage — because water drains more slowly and the roof is more susceptible to wind-driven rain and ice damming.
Steep Pitch
As roof slopes increase — particularly 8:12, 12:12, or greater — our crews must work more slowly and use additional fall-protection equipment to ensure a safe installation. Materials also take longer to transport and install on steep roofs, increasing the overall labor required. For very steep roofs, such as Mansard roofs or roof sections with pitches of 18:12, 21:12, or greater, additional access equipment is often necessary. This may include:
- Pump jack or frame scaffolding
- Roof staging or walk boards
- Increased setup and teardown time
Multiple Existing Layers
While the first layer is included, there is an additional charge of $40 per square for each additional layer. Extra layers can add significant tear-off and cleanup time — and more dumpsters.
Removal of Cedar or Slate Roofing
Removing an existing cedar shake, cedar shingle, or natural slate roof is significantly more labor-intensive than removing a traditional asphalt shingle roof. These premium materials are heavier, installed differently, and require specialized removal techniques to protect the home’s structure and ensure worker safety.
Natural slate roofing presents even greater challenges. Slate is an extremely heavy material — often weighing 800 to 1,500 pounds per square — and each individual slate tile is secured with its own fasteners. Removing slate requires specialized tools, additional manpower, and careful handling due to the weight and sharp edges of the material. Disposal costs are also substantially higher because of the increased weight.
Rotted or Damaged Decking
Any plywood that needs replacing is added once the old roof is off. We document it with photos before proceeding.
Attic Ventilation, or Lack Thereof
Your roof is more than just shingles — it’s a complete roofing system. Proper attic ventilation plays a critical role in protecting your home, improving energy efficiency, and maximizing the lifespan of your new roof, and is required by all roofing manufacturers for a proper warranty.
Decking Code Upgrades
If the existing deck doesn’t meet current code, new sheathing is added. Per the manufacturers, if there is more than a ¼″ gap between the spacing of your roof sheathing, an overlay may be required.
Premium or Designer Shingles
Luxury lines that mimic slate or cedar shake cost more than standard architectural shingles.
Proximity to the Ocean
Though not required, if you’re close to the ocean we usually suggest full ice-shield coverage due to the high winds and driving rains experienced along the coast.
Solar Prep
If you intend to install solar panels, covering the entire area with ice & water shield adds an extra self-sealing membrane to help prevent future leaks. While not required, it’s an option worth considering.
Access
Tight lots, tall homes, and limited staging space all add setup time to the project.
Cost Drivers
What Lowers the Price
Just as often, a project lands at the lower end of the range simply because it’s straightforward:
- A simple gable roof with few valleys or penetrations.
- Only one existing layer to remove.
- A walkable pitch (roughly 4:12–6:12).
- Sound decking that doesn't need replacement.
- Proper attic ventilation already in place.
- Standard architectural shingles rather than a designer line.
- Easy access and staging.
- Bundling — doing your roof alongside siding, gutters, or skylights can reduce overall mobilization costs.
Team Up With a Neighbor
Typical Cost
What a New Roof Typically Costs
Typical Cost by Home Style
| Home Style | Typical Roof Size | Asphalt $ Range | F-Wave $ Range |
|---|---|---|---|
| Cape | ~23 Squares | $13k–$18k | $38k–$52k |
| Ranch | ~25 Squares | $11k–$17k | $32k–$49k |
| Ranch w/ Garage | ~32 Squares | $17k–$22k | $49k–$64k |
| Colonial | ~32 Squares | $18k–$24k | $52k–$70k |
| Salt Box | ~35 Squares | $20k–$27k | $58k–$78k |
| Contemporary | ~38 Squares | $22k–$30k+ | $64k–$87k+ |
| Victorian | 50+ Squares | Custom Quote | Custom Quote |
As a rule of thumb, premium materials run higher. Because of the product itself and the extra detailing beyond a standard asphalt roof, an F-Wave synthetic — or a metal roof — typically runs roughly 3× the cost of the equivalent asphalt shingle roof.
Value vs. Price
Why Some Companies Cost More — or Less
When one roofing estimate is thousands of dollars less than another, it’s almost never because you’re getting the exact same roof for less.
In most cases, the difference comes down to the scope of work, the quality of materials, the warranties included, or the company you’re hiring. On the other end of the spectrum, some large roofing companies operate with a one-call-close sales model and build significantly higher overhead and profit margins into their pricing.
Before comparing the bottom-line price, compare what’s actually included.
What you’re paying for with a quality installer:
- A fully licensed (MA CSL & HIC), insured contractor that stands behind its work.
- Owens Corning Platinum Preferred Contractor status, providing access to premium materials, enhanced manufacturer warranties, and installation standards earned by fewer than 1% of roofing contractors.
- A complete roof replacement, including full tear-off and a complete manufacturer-approved roofing system — not simply installing new shingles over old ones or mixing products from different brands.
- Premium roofing components, including ice and water shield, high-quality synthetic underlayment, starter shingles, ridge caps, and proper ventilation required for long-term performance and warranty eligibility.
- Code-compliant installation, with all required permits pulled and work completed to current Massachusetts building codes.
- Experienced, trained installation crews, rather than temporary day-labor subcontractors.
- Replacement of flashing and other critical components, instead of reusing materials that may already be at the end of their service life.
- Proper attic ventilation upgrades, when needed, to protect the roof system and maintain manufacturer warranty requirements.
- A written workmanship warranty in addition to the manufacturer's warranty, providing protection long after the installation is complete.
- Transparent pricing without high-pressure sales tactics. Some companies build large sales commissions and high overhead into their estimates, while others focus on delivering quality workmanship at a fair price.
Where a cheaper bid often cuts corners:
- Installing new shingles over the old roof instead of tearing off.
- Using cheap off-brand underlayments and accessories.
- Not following code requirements: no drip edge, insufficient ice and water shield, or not enough nails per shingle.
- Reusing old flashing and vents.
- No permit, no inspection, and no written warranty.
- Unlicensed or uninsured labor — which can become your liability.
- Mixing and matching brands, which may not allow for a warranty to be registered.
The Devil’s in the Details
What to Watch Out for When Comparing Roofing Estimates
Not all roofing proposals are created equal.
Some estimates clearly explain exactly what you’ll receive. Others are little more than a single price on a piece of paper.
If an estimate isn’t detailed, you may not know what’s included — or, more importantly, what’s not included — until the job is underway.
Before choosing a contractor, make sure your proposal answers these questions.
Does the estimate specify the exact products being installed?
- Manufacturer name
- Shingle product
- Color
- Underlayment
- Ice & water barrier
- Starter shingles
- Ridge caps
- Ventilation products
If it simply says “new roof,” ask for more detail.
Is it a complete roofing system?
A quality proposal should clearly state whether all roofing components come from the same manufacturer and qualify for the intended warranty.
Some contractors lower costs by mixing products from multiple manufacturers.
Does it explain what’s included with flashing?
Look for details on:
- Step flashing
- Chimney flashing
- Apron flashing
- Drip edge
- Valley metal
- Pipe boots
Does it address ventilation?
Your proposal should explain:
- Whether intake ventilation is required
- Whether ventilation upgrades are included in the price
- Whether your ventilation is adequate
- Whether new ridge vent will be installed
Does it explain what happens if damaged decking is found?
Since the roof deck isn’t visible until the old shingles are removed, the estimate should explain:
- How damaged plywood will be documented
- How replacement will be priced
- What the cost per sheet is
- Whether you’ll be notified before repairs begin
Does it include permits?
A professional proposal should state whether permits are included and whether the contractor will obtain them.
Does it explain cleanup?
Ask whether the proposal includes:
- Dumpster fees
- Daily cleanup
- Magnetic nail sweep
- Landscaping protection
- Final debris removal
Does it clearly explain the warranties?
A good estimate should identify:
- Manufacturer warranty
- Workmanship warranty
- Who stands behind each warranty
- What is required to keep the warranty valid
Does it define the scope of work?
Your proposal should clearly explain:
- Complete tear-off or overlay
- Number of roofing layers being removed
- Areas included in the project
- Areas excluded from the project
- Disposal of old materials
Does it list exclusions?
Every proposal should explain what is not included. Common exclusions include:
- Decking replacement
- Structural repairs
- Gutter replacement
- Fascia or soffit repairs
- Interior damage
- Painting
- Skylight replacement
Knowing the exclusions upfront helps prevent surprise charges later.
A Good Roofing Estimate Should Leave Very Few Questions
The best proposals don’t just tell you what the roof costs — they explain exactly what you’re paying for.
If you finish reading an estimate and still have a long list of questions, that’s usually a sign the proposal isn’t detailed enough. A professional roofing contractor should make it easy to understand the scope of work before you sign a contract.
Pricing FAQs
Common Pricing Questions
Why do roofing quotes vary so much?
Because “a new roof” can mean very different things.
One estimate may include a complete tear-off, premium materials, proper ventilation, new flashing, and strong warranties. Another may use lower-grade materials, reuse existing components, or leave important work out altogether.
On the other end of the spectrum, some larger roofing companies operate with a one-call-close sales model and carry significantly higher overhead, sales commissions, and marketing costs, which can result in prices that are substantially higher than comparable local contractors.
The bottom line is that the lowest price isn’t always the best value, and the highest price doesn’t automatically mean the best roof.
We’re happy to review another contractor’s proposal with you, line by line, so you can make an apples-to-apples comparison and understand exactly what’s included in every estimate.
Do you price-match?
Yes — but only when you’re comparing the same roof.
Not all roofing estimates include the same materials, installation methods, warranties, or scope of work. Matching the lowest price often means matching a smaller scope, lower-quality materials, or fewer protections — and that’s not something we’re willing to do.
What we will do is walk you through our proposal line by line so you can make an apples-to-apples comparison.
If you’ve received another quote from an Owens Corning Platinum Preferred Contractor for the same scope of work, we’ll meet or beat their price.
Our goal isn’t to be the cheapest. It’s to provide the best value by delivering a complete roofing system, quality craftsmanship, and warranties you can count on.
Get a Free, No-Pressure Roofing Quote
The only way to know your exact price is a free inspection. We’ll measure your roof, assess the decking and ventilation, and give you a clear written quote with options — no pressure, no obligation.