Skylights
VELUX Skylight Pricing
Straight answers about what a VELUX skylight costs — fixed, venting, and solar venting — and the one thing that moves the price more than anything else: whether we’re already on your roof. Call us anytime at (781) 293-1417.
What You're Paying For
The DelPrete Skylight System
We are a VELUX Certified Installer, and we install more than 150 skylights a year. That is not a marketing line — it is the reason we can quote a skylight confidently and stand behind it.
Skylights have a bad reputation, and it is almost entirely undeserved. Skylights don’t leak. Bad installations leak. VELUX No Leak skylights carry three layers of water protection and a 10-year installation warranty against leaks — but that warranty only means something when the unit is installed to spec by someone who does this constantly.
A complete skylight installation — not just a hole in the roof:
- The VELUX unit — fixed, venting, or solar venting
- A room-darkening blind, factory-installed — standard on every skylight we sell
- Correct flashing kit for your roof type and pitch — the single most important part
- VELUX-supplied Ice & Water shield for around the entire opening
- Adjustment of the rough framing, including building in if needed
- Interior drywall, shaft, and trim work as required
- Roofing tied back in, matched to your existing shingles — by an Owens Corning Platinum Preferred Contractor
- The VELUX No Leak 10-year installation warranty, plus our written workmanship warranty
The flashing kit is where skylights live or die. It is also, conveniently, the easiest place to save forty dollars and create a twenty-thousand-dollar problem.
Compare the Options
Fixed, Venting, and Solar Venting
Three choices, and the difference between them is simply whether the skylight opens — and if it does, what makes it open.
There is also a mounting decision, which we’ll make for you based on your roof: deck-mounted units sit low and sleek against the roof plane, while curb-mounted units sit on a raised frame and are the right answer on low-slope roofs and many replacements.
Fixed
$
Light only — does not open
What to know:
- The most affordable VELUX skylight
- Brings daylight into a dark room, hallway, stairwell, or bath
- No moving parts, nothing to maintain
- Available deck-mounted or curb-mounted
- Room-darkening blind factory-installed as standard
Venting
$$
Opens — manual or electric
What to know:
- Opens to vent heat, steam, and stale air — a real difference in a bathroom or kitchen
- Manual (rod or crank) or electric operation
- Rain sensor closes an electric unit automatically
- The classic choice above a bath, laundry, or kitchen
- Room-darkening blind factory-installed as standard
Solar Venting
$$$$
Opens — solar powered, no wiring
What to know:
- Runs on a built-in solar panel — no electrical wiring to the unit at all
- Opens and closes by remote, and closes itself when it starts to rain
- No electrician, and no drywall opened up to run a circuit
- VELUX’s flagship — and the one we install most when the room needs venting
- Room-darkening blind factory-installed as standard
Fixed
Light only — does not open
Choose fixed if: you want light, not ventilation.
Venting
Opens — manual or electric
Choose venting if: the room needs air, not just light.
Solar Venting
Opens — solar powered, no wiring
Choose solar venting if: you want a venting skylight without running power to it.
Blinds
Every skylight we sell comes with a room-darkening blind, factory-installed, as standard — not as an upsell.
- Room-darkening blind — factory-installed, included at no additional cost.
- No blind at all — same price, but a 5-week lead time.
- Light-filtering blind — add $675, with a 5-week lead time.
The Biggest Variable
When You Install Matters More Than What You Install
This is the most important thing on this page, and almost nobody tells homeowners about it.
A skylight costs dramatically different amounts depending on whether we are already on your roof. The unit is the same. The labor around it is not.
1. Replacing an existing skylight during a roof replacement — the best price
This is the pricing on this page. The roof is already open, the staging is already up, the crew is already there, and the old unit comes out with the old roof. There is no better time to do it, and it is not close.
2. Cutting in a brand-new skylight during a roof replacement — add 20–45%
If the skylight is going somewhere there wasn’t one before, we have to frame and header a new opening, build the interior shaft, and finish the drywall and trim inside. That is real carpentry, but you are still capturing all the savings of us already being on the roof. Expect roughly 20–45% above the ranges below.
3. A stand-alone skylight install — 2–3× the cost
If you are not doing a roof, everything changes. We are mobilizing a crew, staging the roof, opening a small area of shingles, and re-integrating it — all for one unit. A stand-alone install can run two to three times the pricing shown here.
Bottom line: if your roof is anywhere near the end of its life and you have ever thought about a skylight, do them together. It is the single biggest lever on this page.
Cost Drivers
What Raises the Price
A number of factors can push a skylight project toward the higher end of the range. Here are the ones we see most often:
Fixed, Venting, or Solar
The unit itself. A fixed skylight is the most affordable; a venting unit costs more; a solar venting unit is the premium — and the one that needs no wiring.
When You Do It
The biggest driver of all. Replacing during a re-roof is the best price. Cutting in new during a re-roof adds roughly 20–45%. A stand-alone install runs 2–3× the cost. See above — it matters more than the model you choose.
Cutting In a New Opening
A brand-new skylight means framing and headering the rough opening, building the interior light shaft, and finishing drywall and trim. A replacement into an existing opening skips almost all of that.
Size
Bigger units cost more — and past a certain size, the opening may require additional structural headering.
Deck-Mounted or Curb-Mounted
Deck-mounted units sit low against the roof and look sleeker. Curb-mounted units sit on a raised frame and are the right answer on low-slope roofs and many replacements. Your roof decides more often than you do.
Roof Pitch and Complexity
Steep roofs, cut-up roofs, and skylights near valleys, ridges, or chimneys all take longer and require more careful flashing.
Roofing Material
Asphalt shingle is the baseline. Cedar, slate, metal, and low-slope EPDM each require a different flashing approach — and more labor.
Interior Shaft & Finish Work
On a new cut-in, the shaft from the roof deck down to the ceiling has to be framed, insulated, drywalled, taped, and trimmed. On a cathedral ceiling that’s simple. On a house with an attic above the room, it isn’t.
Blind Choice
A room-darkening blind is factory-installed and included. A light-filtering blind adds $675 and a 5-week lead time. Choosing no blind at all is the same price — but also a 5-week lead time, so the blind is genuinely free.
Rot & Deck Repair
Old skylights that were poorly flashed often leave rot behind. Anything we find is documented with photos and repaired before the new unit goes in.
Cost Drivers
What Lowers the Price
Just as often, a project lands at the lower end of the range simply because of good timing and a straightforward roof:
- Doing it while we’re already replacing your roof — by far the biggest saving available.
- Replacing an existing skylight rather than cutting in a new opening.
- Choosing a fixed unit rather than a venting or solar venting one.
- A smaller unit.
- A straightforward asphalt-shingle roof at a walkable pitch.
- Taking the standard room-darkening blind, which is included.
Typical Cost
What a VELUX Skylight Typically Costs
Below are typical installed ranges per skylight. The three columns are the three ways this gets done — and the difference between them is larger than the difference between any two models.
Typical Installed Cost per Skylight
| Skylight Type |
Replacing an Existing Skylight during a roof replacement |
New Cut-In during a roof replacement (+20–45%) |
Stand-Alone Install no roofing project (2–3×) |
|---|---|---|---|
|
Fixed $
Light only — does not open |
$150 – $250 | $25,000 – $42,000 | $42,000 – $70,000 |
|
Venting $$
Opens — manual or electric |
$200 – $325 | $34,000 – $55,000 | $56,000 – $91,000 |
|
Solar Venting $$$$
Opens — solar powered, no wiring |
$325 – $525 | $55,000 – $88,000 | $91,000 – $147,000 |
How to read this table.
The first column is the price you want. That’s a VELUX skylight replaced while we’re already replacing your roof — the crew is there, the staging is up, and the old unit comes off with the old shingles. Every other column is a multiple of it.
Ranges cover the full span of VELUX sizes, from the smallest curb-mounted unit to the largest deck-mounted one. Where you land inside a range depends mostly on the size of the unit and the mounting your roof calls for. Every skylight includes a factory-installed room-darkening blind at no additional cost; a light-filtering blind adds $675 and a 5-week lead time.
The cheapest skylight you will ever buy is the one installed while your roof is already off. If a re-roof is anywhere on your horizon, this is the conversation to have now — not in three years.
Value vs. Price
Why Some Companies Cost More — or Less
Skylights don’t leak. Bad installations leak. That sentence is the entire value argument, and it is worth taking seriously, because a skylight is the only product we install that puts a deliberate hole in your roof.
A VELUX No Leak skylight carries three layers of water protection and a 10-year installation warranty against leaks. That warranty is contingent on the unit being installed to VELUX specification — with the correct flashing kit for your roof. A generic flashing kit, or none at all, voids it. And you will not find out for two years.
Before comparing the bottom-line price, compare what’s actually included.
What you’re paying for with a quality installer:
- A fully licensed (MA CSL & HIC), insured contractor that stands behind its work.
- VELUX Certified Installer status — and more than 150 skylights installed a year.
- The correct VELUX flashing kit for your roof type and pitch. Not a generic one, and not caulk.
- Ice & water shield around the entire opening.
- Roofing tied back in and matched — by an Owens Corning Platinum Preferred Contractor.
- A room-darkening blind, factory-installed, included as standard.
- Proper framing and headering of the rough opening.
- Interior shaft, drywall, and trim finished properly — not left for you to deal with.
- The full VELUX No Leak 10-year installation warranty, registered.
- A written workmanship warranty on top of it.
- Transparent pricing without high-pressure sales tactics. Some companies build large sales commissions and high overhead into their estimates, while others focus on delivering quality workmanship at a fair price.
Where a cheaper bid often cuts corners:
- No flashing kit — the skylight is bedded in roofing cement and caulk. This is the classic leaking skylight, and it is why skylights have the reputation they do.
- The wrong skylight for a low-slope roof. VELUX manufactures both deck-mounted and curb-mounted skylights, and each is designed for specific roof-pitch requirements. When a roof has a pitch of less than 3:12, installers must use a curb-mounted VELUX skylight. Curb-mounted units are specifically designed for flat and low-slope applications, because the elevated curb directs water away from the skylight and provides superior protection against water intrusion.
- Not using the VELUX-supplied ice & water shield around the opening. Failure to do so voids any warranty.
- An installer who isn’t VELUX certified — and doesn’t know the correct skylights to use, or the correct install methods.
- Skipping the interior finish work and leaving you with a raw drywall shaft.
- Re-using an old, tired flashing kit on a new unit.
- A generic or off-brand skylight instead of a VELUX unit.
- Unlicensed or uninsured labor — on a hole cut in your roof.
A skylight is a small line item on a roofing invoice and a very large line item when it fails. This is not the place to save two hundred dollars
The Devil’s in the Details
What to Watch Out for When Comparing Skylight Estimates
Not all skylight proposals are created equal — and with skylights, the difference between a good one and a bad one is almost entirely invisible on the day it’s finished.
A skylight installed in roofing cement and a skylight installed with the correct VELUX flashing kit look identical from your living room. You find out which one you bought in about two years, usually during a February thaw.
Before choosing a contractor, make sure your proposal answers these questions.
Is it an actual VELUX unit — and which one?
- Manufacturer and model
- Fixed, venting, or solar venting
- Deck-mounted or curb-mounted
- Size
- Glass package
- Blind type
If the estimate just says “skylight,” you have no idea what you’re getting.
Is the correct VELUX flashing kit included?
This is the question. Ask for the flashing kit by name, and confirm it matches your roof type and pitch. A skylight installed without the proper flashing kit — bedded in roofing cement instead — is the single most common cause of a leaking skylight, and it voids the VELUX warranty.
Is ice & water shield included around the opening?
It should be, on all four sides. It is inexpensive, and it is the last line of defense.
Is the installer VELUX certified?
The VELUX No Leak 10-year installation warranty depends on the unit being installed to specification. Ask whether the company is certified, and how many skylights they install in a year.
Is it a replacement or a new cut-in?
A replacement drops into an existing opening. A new cut-in requires framing, headering, an interior shaft, and drywall — and costs 20–45% more when done during a re-roof, and far more as a stand-alone job. Make sure the quote says which one it is.
Who is doing the interior finish work?
On a new cut-in, ask specifically:
- Who frames and insulates the shaft?
- Who hangs, tapes, and finishes the drywall?
- Who trims it out?
- Who paints it?
What blind is included?
A room-darkening blind should be included, factory-installed, at no additional cost. A light-filtering blind is an upgrade with a lead time. Make sure you know which one you’re getting and when it will arrive.
What happens if rot is found?
Old, poorly flashed skylights frequently leave rot in the deck around them. The estimate should explain how damage will be documented and priced before the new unit goes in.
Does it clearly explain the warranties?
A good estimate should identify:
- VELUX product warranty
- VELUX No Leak 10-year installation warranty
- Whether the installer is certified to register it
- Roofing manufacturer warranty
- Workmanship warranty
Does it list exclusions?
Every proposal should explain what is not included. Common exclusions include:
- Interior drywall, trim, and paint
- Deck repair or rot found after removal
- Structural headering for oversized units
- Electrical work for a hardwired venting unit
- Blind upgrades
A Good Skylight Estimate Should Leave Very Few Questions
The best proposals don’t just tell you what the skylight costs — they tell you exactly how the water gets around it.
If you finish reading an estimate and still have a long list of questions, that’s usually a sign the proposal isn’t detailed enough.
Pricing FAQs
Common Pricing Questions
Why do skylight quotes vary so much?
Because the same skylight can be installed three completely different ways — and because not every “skylight” quote includes the parts that keep water out.
The biggest variable is timing. Replacing a skylight while we’re already replacing your roof is by far the best price. Cutting in a brand-new skylight during that same re-roof adds roughly 20–45%, because we’re framing an opening, building an interior shaft, and finishing drywall. A stand-alone install — no roofing project — can run two to three times the cost, because we’re mobilizing and staging an entire roof for one unit.
The other variable is what’s actually in the box. A VELUX unit installed with the correct flashing kit and ice & water shield is a different product than a skylight bedded in roofing cement, even if the model number matches.
We’re happy to review another contractor’s proposal with you, line by line, so you can make an apples-to-apples comparison.
Do you price-match?
Generally, no.
A skylight is a deliberate hole in your roof, and the parts that keep water out of it — the correct VELUX flashing kit, ice & water shield, a certified installation — are exactly the parts a cheaper bid leaves out. Matching a lower price would mean matching a smaller scope on the one product where that is least advisable.
Rather than inflating our prices with the expectation of negotiating later, we provide our best price upfront.
If you’ve received another quote, we’re happy to review it with you and explain the differences — starting with whether the flashing kit is in it.
Get a Free, No-Pressure Skylight Quote
We’ll look at your roof, your ceiling, and your timing — and tell you honestly whether to do it now, or wait and do it with your roof. Clear written quote, no pressure, no obligation.