Customer Reviews
★ Elite Contractor

James Hardie Fiber Cement Siding — Engineered for New England.

DelPrete Home Improvements is a James Hardie Elite Contractor — the highest installer status James Hardie awards. We install Hardie’s HZ5 product line, engineered specifically for the freeze-thaw cycles, snow loads, and dramatic seasonal swings that define the New England climate. Five times thicker than vinyl, non-combustible, and backed by a 30-year transferable warranty.

#1 Rated out of 61 Contractors in MA!

Ranked by Mass Roofing & Siding Contractors

Elite

Top tier of the James Hardie Contractor Alliance — fewer than 1% of contractors qualify.

30-Year Warranty

Non-prorated, fully transferable substrate warranty. ColorPlus finish: 15 years.

Non-Combustible

Class A fire-rated cladding — may qualify your home for reduced insurance premiums.

Product Description

What Is James Hardie Siding?

James Hardie is the most-installed siding brand in North America, found on more than 8 million homes. It’s a fiber cement composite — Portland cement, sand, water, and cellulose fibers, all sourced right here in the USA — pressed into rigid boards that look like real wood but behave nothing like it. Because there is little to no petroleum in the products, James Hardie is not subject to the drastic price swings that affect petroleum-based materials like vinyl. Hardie boards won’t rot, won’t burn, won’t feed termites, won’t get hammered by woodpeckers, and will not crack when the temperature swings 60 degrees in a week. In a New England winter, that matters.

 

Hardie engineers their boards differently for different climates. The product line we install on every home in Eastern Massachusetts is HZ5® — “HardieZone 5” — formulated specifically for regions that see freezing temperatures, snow, ice, and big seasonal temperature variations. HZ5 boards include a built-in drip edge for better water management, enhanced moisture resistance, and a surface engineered for superior paint adhesion. They are not the same boards Hardie sells in Florida.

 

The full Hardie® product line gives us the flexibility to design any architectural style — from a classic New England Cape with cedar-shake gables to a modern board-and-batten farmhouse to a turn-of-the-century Victorian with mixed textures. Browse the full James Hardie product catalog and ColorPlus® palettes in the live tool below.

DelPrete's Credentials

Elite Certified to Install James Hardie

James Hardie does not sell their products to just any contractor — they tier installers in the James Hardie Contractor Alliance Program, and they audit them. Elite is the top tier.

DelPrete Home Improvements is one of a small group of contractors in Eastern Massachusetts that has earned and continues to maintain Elite Contractor status. This isn’t a logo we paid for — it’s a status we have to re-earn every single year. It’s also worth noting that since 2023, DelPrete Home Improvements has been — and continues to be — rated the #1 James Hardie installer in Massachusetts.

 

To hold Elite status with James Hardie, DHI must continually meet every one of these requirements:

Top Tier · Contractor Alliance

DelPrete Home Improvements has held Elite status as a measure of installation quality, customer satisfaction, and operational integrity. When you work with us, James Hardie stands behind the installation as readily as the product.

 

<1%

Of Hardie installers reach Elite

90%+

Required GuildQuality score

Improperly installed Hardie is the #1 cause of Hardie warranty claims — and Elite installation is your protection against that.

Why We Recommend It

Why DelPrete Installs James Hardie

We’ve installed every major siding brand on the market. We come back to James Hardie for one reason: it’s the product we’d put on our own homes. Here’s exactly why:

5× Thicker Than Vinyl

HardiePlank is roughly 5/16″ thick — about five times the thickness of standard vinyl. The result is deeper shadow lines, a real-wood appearance, and impact resistance vinyl can’t match. It doesn’t oil-can in the heat or get brittle in the cold.

AZEK Trim Over Hardie Trim
James Hardie acquired AZEK/TimberTech in 2025, so AZEK is now part of the Hardie family — and for trim we actually prefer it over Hardie Trim. AZEK boards come in longer lengths (fewer butt seams), install with Cortex Hidden Fasteners for a flawless nail-free face, and pair with a J-pocket detail so cut ends tuck cleanly inside rather than being caulked. The result is a noticeably cleaner finish.
Non-Combustible Cladding
James Hardie carries a Class A fire rating and complies with ASTM E136 as a non-combustible material — it doesn’t ignite, doesn’t melt, doesn’t feed flames. In wildfire-prone areas this can be required by code; everywhere else, it can earn you a homeowners insurance discount.
Won't Rot, Warp, or Swell
Cedar splits. Engineered wood swells when it gets wet. Vinyl warps in direct sun. Fiber cement is dimensionally stable — it does not absorb water like wood, doesn’t expand and contract significantly with temperature, and won’t rot even when the back side stays damp.
Engineered for OUR Climate
HZ5® boards are formulated for cold-climate performance — additional moisture resistance, a built-in drip edge, surface chemistry tuned for paint adhesion through freeze-thaw cycles. Hardie literally makes a different product for the South.
Pest- & Woodpecker-Proof
Termites can’t eat fiber cement. Carpenter ants can’t tunnel through it. Woodpeckers give up after one strike — and we know this first-hand from a past customer. If you’ve ever replaced cedar shakes after a woodpecker found a sweet spot, you’ll appreciate how much that matters in our area.
ColorPlus® Won't Peel

Field-applied paint on cedar peels — period. James Hardie’s ColorPlus finish is baked onto the boards in a controlled factory environment, cured between coats, and arrives at your home ready to install. The color carries a 15-year warranty against fading, chipping, and cracking.

Proven ROI on Resale

The 2025 Remodeling Cost vs. Value report puts fiber cement siding replacement at the top of exterior projects for return on investment — recouping a substantial share of the project cost in resale value, and frequently more in markets where Hardie is recognized as the premium standard.

30-Year Transferable Warranty
Substrate is covered for 30 years, non-prorated, fully transferable to the next owner. ColorPlus finish: 15 years. HardieTrim: 15 years. Combined with our DelPrete Lifetime Workmanship Guarantee, the work is protected from every angle.
New England Lifespan

How Long James Hardie will Last in New England

30 to 50+ years. That’s the consistent real-world range for James Hardie fiber cement siding installed correctly in our climate. We’re not quoting a brochure — Hardie homes from the early 1990s still look nearly indistinguishable from new. Lighter ColorPlus finishes may need a refresh paint job somewhere around year 20–25, but the boards themselves are solid.

 

New England is hard on siding — freeze-thaw cycles, nor’easter wind-driven rain, ice damming, salt air, and dramatic temperature swings that destroy lesser materials. James Hardie’s HZ5 board was engineered for exactly this: it won’t absorb water like wood, won’t get brittle like cold vinyl, and won’t suffer the slow nail-popping cycle of cement boards installed without a freeze-thaw spec.

 

But — and this is what matters — Hardie’s lifespan in New England depends heavily on installation. Improper fasteners, missed flashing, and incorrect clearances can shave decades off the siding’s life. That’s why James Hardie audits its Elite contractors — and why we recommend never letting a non-certified installer touch the product. Our DelPrete Lifetime Workmanship Guarantee sits on top of the manufacturer warranty as your second layer of protection.

James Hardie Warranty Coverage
Substrate (HardiePlank, HardieShingle, HardiePanel, HardieSoffit)

30

YEARS · NON-PRORATED
ColorPlus® Technology factory finish

15

YEARS · LIMITED

HardieTrim® boards

15

YEARS · LIMITED

Manufacturer workmanship (when installed by Elite)

2

YEARS · LIMITED

DelPrete Lifetime Workmanship Guarante

∞

LIFETIME · DELPRETE-BACKED

Realistic NE lifespan when installed correctly

30-50+

YEARS · IN-FIELD

Looking for pricing?

Curious what new James Hardie siding might cost for your home? Visit our Siding Pricing page for detailed cost breakdowns by home size and product line.

Side-by-Side

James Hardie vs. Other Siding Materials

Here’s an honest comparison. We install vinyl, cedar shake, and engineered wood too — every product has a place. But for a homeowner who wants the best long-term value in New England, the numbers consistently land in one place.
Feature Best-Choice-Icon James Hardie Vinyl Cedar / Real Wood Engineered Wood Everlast
Lifespan in New England 30–50+ yrs 15–25 yrs 15–30 yrs 25–40 yrs 50+ yrs
Fire resistance Class A · Non-combustible Melts Combustible Treated, combustible Combustible (composite)
Insect & pest-proof Yes — inedible Yes No · termites, woodpeckers Treated · long-term risk Yes — inorganic
Freeze-thaw performance Excellent (HZ5-engineered) Brittle below 0°F Splits & swells Good Excellent — water-impervious
Color longevity 15-yr ColorPlus warranty Fades · cannot repaint Repaint every 5–7 yrs Repaint every 7–10 yrs Lifetime fade warranty · never paint
Realistic wood-grain look Authentic · deep shadow lines Better than it used to be It IS wood Strong CedarTouch embossed finish
Maintenance Wash only Wash only Stain or paint every 3–7 yrs Repaint, occasional inspection Wash only · no paint or caulk
Manufacturer warranty 30-yr non-prorated, transferable Lifetime, often prorated None (raw material) 5/50-yr limited Lifetime Limited · transferable
Resale ROI (2025 Cost vs. Value) ~80%+ recoup ~80% recoup ~60–65% ~70–80% ~75–80%
Upfront cost (relative) $$$ $ $$$ $$ $$$$
Installation difficulty High · requires certified crew Low Medium Medium High · plates required between seams for expansion

Cost ranges and lifespan figures based on industry data including the 2025 Remodeling Cost vs. Value Report and James Hardie published specifications. Real-world performance depends heavily on installation quality.

James Hardie FAQs

Common Questions About James Hardie

No — when the right product is installed correctly. James Hardie sells two product lines: HZ5 for cold-climate regions like ours, and HZ10 for hot/humid coastal regions. We exclusively install HZ5 in Eastern Massachusetts. HZ5 boards are formulated with enhanced moisture resistance, a built-in drip edge, and a surface chemistry engineered specifically to handle the freeze-thaw cycles, snow, and ice that define a New England winter. Cracking issues with fiber cement are almost always traceable to either (1) the wrong climate-zone product being used or (2) improper installation — wrong fasteners, missed clearances, or non-spec gapping. Both are eliminated by hiring an Elite Contractor.

Realistically, 30 to 50+ years when installed by an Elite Contractor following James Hardie Installation Best Practices. The substrate carries a 30-year non-prorated warranty, and the ColorPlus finish carries a 15-year warranty. Hardie homes installed in our region in the early-to-mid 1990s are still performing today.

Two completely different materials with different lifespans, looks, and performance characteristics:

  • Composition: Hardie is Portland cement, sand, water, and cellulose fiber. Vinyl is PVC plastic.
  • Thickness: Hardie is roughly 5/16″ thick — about 5× thicker than standard vinyl, giving deeper shadow lines and a more authentic wood appearance.
  • Fire: Hardie is non-combustible (Class A). Vinyl melts and drips.
  • Freeze: Hardie is dimensionally stable. Vinyl gets brittle below 0°F.
  • Color: Hardie ColorPlus is baked-on factory finish with a 15-year warranty. Vinyl color is in the material — fades and cannot be repainted reliably.
  • Lifespan: Hardie 30–50+ years. Vinyl 15–25 years in NE.
  • Cost: Hardie is typically 30–50% more upfront, but lower lifetime cost due to longer life and stronger resale.

Not if you order ColorPlus® Technology — the finish is factory-baked-on, cured between coats, and arrives at your home ready to install. ColorPlus is what we recommend on virtually every project for that reason. If you prefer to choose your color and paint after the fact, we can install primed boards instead — these need to be field-painted with 100% acrylic exterior paint within 180 days of installation. ColorPlus carries a 15-year fade/chip/peel warranty; field paint does not.

Three concrete reasons:

  • Your warranty depends on it. James Hardie warrants the product when it’s installed to spec. Improper installation is the #1 cause of denied warranty claims — and most general contractors aren’t trained on Hardie’s specific spec.
  • Fiber cement is unforgiving. It’s heavy (~300 lbs per 100 sq ft), it requires specialized cutting tools to avoid silica dust, and it must be fastened, gapped, flashed, and clearance-set to exact spec. A vinyl crew installing Hardie for the first time typically gets several of these wrong.
  • Audited accountability. Elite contractors are audited by James Hardie field reps, surveyed by GuildQuality, and required to maintain a 90%+ customer satisfaction score. We can lose the credential — which is what makes it worth something to you.

Yes, Hardie is heavier — about 300 lbs per 100 square feet, versus 60–70 lbs for vinyl. For a typical home, the existing wall framing is more than adequate to handle the additional load with no reinforcement. The weight matters mostly during installation: it requires more manpower, scaffolding, and the right equipment, which is why a properly trained crew matters. We’ll assess your sheathing and substrate during the free estimate to confirm everything’s in order.

Often, yes. Because James Hardie is non-combustible (ASTM E136) and carries a Class A fire rating, many home insurance carriers offer reduced premiums for homes clad in fiber cement — particularly in areas where fire risk or hail damage is a concern. We recommend asking your insurance agent to quote the policy under your current siding versus James Hardie before and after installation. We’ve seen homeowners save anywhere from a few percent to over 10% annually. Hail-damage resistance is another category where carriers may offer reductions.

Yes. Because ColorPlus Technology is factory-cured (no field painting required), James Hardie can be installed year-round in New England — including in winter, as long as conditions are workable. Field-painted (primed) boards are the exception, since exterior paint cure depends on temperature and humidity. We adjust scheduling around weather, but Hardie installation is not a summer-only project.

For a typical 2,000–2,500 sq ft New England home, plan on 2 to 4 weeks from start to completion, weather permitting. The schedule includes tear-off of existing siding, inspection of sheathing, installation of a water-resistive barrier, board installation, trim, flashing, soffit work, caulk, cleanup, and final walkthrough. Larger homes, complex architecture, or homes with lots of trim detail and dormers can run longer. We give a firm timeline at contract signing.

Absolutely — and it’s a popular New England look. Many of our nicest projects use HardiePlank lap on the main field, HardieShingle on gables and dormers for that classic Cape Cod cedar-shake feel, and HardiePanel with HardieTrim battens on accent walls or carriage-house garage gables. Mixing textures with a coordinated ColorPlus palette is one of the strongest ways to get a custom, high-end look. We can mock options for you during the free estimate.

Yes — over 700 ColorPlus® options, spanning warm whites, classic New England grays and blues, deep navies, sage and forest greens, rich reds, browns, and blacks. We bring physical sample chips to the in-home estimate so you can see the color in your home’s actual lighting. James Hardie also publishes annual “Color of the Year” releases (2026’s is Iron Gray) and pre-curated color palettes by architectural style if you want a head start.

Both are lap siding products, but Artisan is a premium tier — thicker boards (about 5/8″ vs. 5/16″), deeper shadow lines, and a more authentic real-wood clapboard appearance. Artisan also has a tighter, traditional Colonial-style reveal. For most homes, HardiePlank delivers the durability and look at the right price point. For higher-end traditional homes — particularly Colonials, Capes, and Federal-style architecture in established neighborhoods — Artisan is worth the upgrade. We can quote both side-by-side.

Ready for an Elite James Hardie Estimate?

Free, no-pressure, no-obligation. Sample chips brought to your home. We don’t sell — we educate.

Want to see it in person?

Visit our 2,000 sq ft showroom at 201 West Grove St, Middleboro, MA to see our complete window installationing, siding, window, door, and decking displays in real lighting — alongside material samples from every brand we install. Open weekdays 8am–5pm; weekends by appointment.

Scroll to Top